1 | Faculty obtained (21 April 2004) |
2 | Prepare bells for lifting out of tower |
3 | Remove tie rods and prepare frame for de-construction |
4 | Lift bells and part of the frame out of tower, lift up joists, beams, and lead |
5 | Prepare templates for sound control panels |
6 | Remove clock to a place of safety |
7 | Cut access panel through ceilings so that bell frame can be removed |
8 | Remove remaining bell frame |
9 | Measure up for the new bell frame |
10 | Remove existing timber roof |
11 | Install new timber roof |
12 | Install lifting and shifting beams |
13 | Lay lead work to roof |
14 | Extend and finish access panel through floors of new bell and clock chambers |
15 | Lay new boarding to bell and clock chamber floors |
16 | Install new ringing gallery floor with access panel and balustrade |
17 | Install guards to west window |
18 | Construct new bell frame at Whitechapel |
19 | Make and install sound control panels |
20 | Cast two new bells |
21 | Cut and form padstones for new bell frame |
22 | Install new bell frame |
23 | Install electricity to tower with emergency lighting |
24 | Make good holes around frame members |
25 | Bless new bells before they are hung |
26 | Hang bells |
27 | Fit controls to sound panels |
28 | Make good walls to ringing gallery and decorate |
29 | Restore and re-fix peal boards and other plaques |
30 | Clear out and clean all chambers in the tower |
31 | Install clock with auto-wind facility |
32 | Re-dedication by the Bishop (10th January 2005) |